Epson 740c - PowerLite XGA LCD Projector Kurulum Kılavuzu - Sayfa 8

Projektör Epson 740c - PowerLite XGA LCD Projector için çevrimiçi göz atın veya pdf Kurulum Kılavuzu indirin. Epson 740c - PowerLite XGA LCD Projector 19 sayfaları. Product support bulletin(s)
Ayrıca Epson 740c - PowerLite XGA LCD Projector için: Parça Listesi (1 sayfalar), Hızlı Kurulum Kılavuzu (2 sayfalar), Güncelleme Kılavuzu (1 sayfalar), Kullanıcı Kılavuzu (14 sayfalar), Teknik Özet (7 sayfalar), Ürün Destek Bülteni (15 sayfalar), Hızlı Kurulum Kılavuzu (4 sayfalar)

ELPMBUNI

Securing the Bracket to the Projector

NOTE:

The two-piece mounting legs are designed to allow routing of the legs around critical ventilation

screens on the base of the projector as shown. You may also reduce the two-piece leg to a one-piece

leg as shown for a better overall fit to the projector.

Locate the mounting points on the bottom of the projector and use the appropriate number of mounting

legs.

Select the mounting hardware that your projector requires and loosely install the universal mount to your

projector.

NOTE: If your projector requires M3 mounting hardware. Use the M3 x 16 Phillips screws with the M3

flat washers (supplied). Insert the M3 x 16 Phillips screws with the flat washers attached through

the leveling barrel. Using a Phillips screwdriver, loosely secure the screws to the projector

(Figure A).

NOTE: The levelers and leg assembly screws must be loose in order to adjust the height of the mounting

bracket.

FIGURE

Two-Piece

Leg

Allen

Wrench

Mounting

Hardware

Installation Manual

Line up the leveling barrels to the mounting points.

Figure 5

FIGURE

One-Piece

Leg

Inverted

Projector

Leveling

Barrels

FIGURE A

Page - 9 -