Cisco 6945 Series Kullanıcı Kılavuzu - Sayfa 4

IP Telefon Cisco 6945 Series için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Cisco 6945 Series 10 sayfaları. 6900 series
Ayrıca Cisco 6945 Series için: Veri Sayfası (5 sayfalar), Hızlı Referans (2 sayfalar), Sürüm Notları (18 sayfalar), Kullanıcı Kılavuzu (38 sayfalar), Kullanıcı Kılavuzu (8 sayfalar), Yönetim Kılavuzu (14 sayfalar), Kurulum Kılavuzu (16 sayfalar), Özellikler (29 sayfalar), Hızlı Başlangıç Kılavuzu (2 sayfalar), Hızlı Kurulum ve Kullanım Kılavuzu (12 sayfalar), Hızlı Referans Kullanım Kılavuzu (2 sayfalar), Manuel (2 sayfalar), Talimatlar (3 sayfalar), Hızlı Başlangıç Kılavuzu (2 sayfalar), Özellikler Kılavuz (4 sayfalar), Kullanıcı Kılavuzu (34 sayfalar), Hızlı Kurulum Kılavuzu (12 sayfalar), Hızlı Referans Kılavuzu (2 sayfalar)

Cisco 6945 Series Kullanıcı Kılavuzu
Cisco 6945 Phone and Voicemail User Guide

To Send an Incoming Call to Voicemail...

o While your phone is ringing, press the "Divert" softkey on the base of the screen

To Forward All Calls Straight to Voicemail...

o Press the "Fwd All" softkey at the bottom of the screen and press the Messages button

To Cancel Call Forwarding ...

o Press the "Fwd Off" softkey at the bottom of the screen

New Stuff

Call Back - The Call Back feature allows you to receive call-back notification on your phone when a called
party line becomes available. The called party must also be on the Cisco phone system.
o While calling another party, whether it is ringing or you have been sent to voicemail, you can
press the Call Back softkey at the bottom of the screen and then select the Exit softkey to
activate your Call Back request
o The next time that called party hangs up their phone (either from the call they are currently on
or the next call they make), you will be notified on your phone that they are now available
o At that point you will have the option to call them (using the Dial softkey at the bottom of your
screen) or Cancel the Call Back request
Call Park - The Call Park feature allows you to place a call on hold, so it can be retrieved from another
phone. The retrieving phone must also be on the Cisco phone system. If you are on an active call at
your phone, you can park the call to a call park extension by pressing the Park button on the bottom of
the screen. Someone on another phone in your system can then dial the call park extension to retrieve
the call.
o While on a call press the Park softkey
o Note the Park Number displayed on the screen (4300 – 4319)
o Notify other party of the call and give them the Park Number
o Other party simply picks up their phone and dials the Park Number to connect
o Here are some things to keep in mind:
Revised 1/30/2013
Wheaton College
The Park Number will display on your screen for 10 seconds
If the parked call is not retrieved after 60 seconds the originating phone will ring once to
remind the "parker" that the user is still on hold
This reminder will continue every 30 seconds thereafter until the call is retrieved
If the call is not retrieved after 3 minutes the call will be returned to the "parker"
Page 4