Siemens XC1005-A Operasyon - Sayfa 7
Kontrol Ünitesi Siemens XC1005-A için çevrimiçi göz atın veya pdf Operasyon indirin. Siemens XC1005-A 32 sayfaları. Extinguishing control unit
Sayfayı Yazdır
2
Safety
2.1
Safety notices
Building Technologies
Fire Safety
The safety notices must be observed in order to protect people and property. The
safety notices in this document contain the following elements:
-
Symbol for danger
-
Signal word
-
Nature and origin of the danger
-
Consequences if the danger occurs
-
Measures or prohibitions for danger avoidance
Symbol for danger
This is the symbol for danger. It warns of risks of injury.
Follow all measures identified by this symbol to avoid injury or death.
Additional danger symbols
These symbols indicate general dangers, the type of danger or possible
consequences, measures and prohibitions, examples of which are shown in the
following table:
General danger
Voltage/electric shock
Battery
Signal word
The signal word classifies the danger as defined in the following table:
Signal word
Danger level
DANGER
DANGER identifies a dangerous situation, which will result
directly in death or serious injury if you do not avoid this
situation.
WARNING
WARNING identifies a dangerous situation, which may
result in death or serious injury if you do not avoid this
situation.
CAUTION
CAUTION identifies a dangerous situation, which could
result in slight to moderately serious injury if you do not
avoid this situation.
NOTICE
NOTICE identifies possible damage to property that may
result from non-observance.
Design for risk of injury
Explosive atmosphere
Laser light
Heat
A6V10257477_c_en_--
Safety
7
2012-06