Siemens CD634GB.1 Kullanım Kılavuzu - Sayfa 14
Fırın Siemens CD634GB.1 için çevrimiçi göz atın veya pdf Kullanım Kılavuzu indirin. Siemens CD634GB.1 32 sayfaları.
Sayfayı Yazdır
Time-setting options
en
Cooking time
If you set the cooking time for your meal, operation
stops automatically once this time has elapsed. The
oven stops heating.
Prerequisite: A heating type and a temperature have
been set.
Press the 0 button.
1.
The time-setting options menu opens.
Set the cooking time using the rotary selector.
2.
Press the Start/Stop button to start.
3.
You can see the x cooking time counting down in
the status bar.
The cooking time has elapsed
A signal sounds. The oven stops heating. You can
cancel the audible signal early using the 0 button.
Cancelling the cooking time
Press the 0 button to open the time-setting options
menu and turn the cooking time back. The operation
ends. Press the 0 button to close the menu.
Changing the cooking time
Press the 0 button to open the time-setting options
menu. Change the cooking time using the rotary
selector.
14
End time
If you change the end time, please remember that
easily spoiled foods must not be allowed to remain in
the cooking compartment for too long.
Prerequisite: The selected operation has not already
begun. A cooking time has been set. The time-setting
options menu 0 is open.
Example in the picture: You put the dish in the cooking
compartment at 9:30. It takes 45 minutes to cook and
will be ready at 10:15, but you would like it to be ready
at 12:45 instead.
Touch the ¿ arrow to continue to "y End".
1.
Set the end time using the rotary selector.
2.
Confirm with the Start/Stop button.
3.
The oven is in standby. The y symbol and the time
when operation will be finished appear in the status bar.
Operation starts at the appropriate time. You can see
the cooking time counting down in the status bar.
The cooking time has elapsed
A signal sounds. The oven stops heating. You can
cancel the audible signal early using the 0 button.
Correcting or cancelling the end time
You cannot correct the end time once the programme
has started. Press the On/Off button to delete all
settings.