Siemens CD914GX 1 Series Kullanım Kılavuzu ve Kurulum Talimatları - Sayfa 39

Fırın Siemens CD914GX 1 Series için çevrimiçi göz atın veya pdf Kullanım Kılavuzu ve Kurulum Talimatları indirin. Siemens CD914GX 1 Series 44 sayfaları.

Sayfayı Yazdır

Siemens CD914GX 1 Series Kullanım Kılavuzu ve Kurulum Talimatları

21 Declaration of Conformity

BSH Hausgeräte GmbH hereby declares that the appli-

ance with Home Connect functionality conforms to the

essential requirements and other relevant provisions of

Directive 2014/53/EU.

A detailed RED Declaration of Conformity can be found

online at siemens-home.bsh-group.com among the ad-

ditional documents on the product page for your appli-

ance.

5 GHz WLAN (Wi-Fi): For indoor use only.

22 Installation instructions

Observe this information when installing the appliance.

22.1 General installation instructions

Follow these instructions before you start with

the installation of the appliance.

¡ The safe operation of this appliance can

only be guaranteed if it has been installed

to a professional standard in accordance

with these installation instructions. The in-

staller shall be liable for damages incurred

as a result of incorrect installation.

¡ Check the appliance for damage after un-

packing it. Do not connect the appliance if

it has been damaged in transit.

¡ Before starting up the appliance, remove

any packaging material and adhesive film

from the cooking compartment and the

door.

¡ Proceed in accordance with the installation

sheets for installing accessories.

Only applies to Great Britain

Hereby, BSH Hausgeräte GmbH declares that the ap-

pliance with Home Connect functionality is in compli-

ance with relevant statutory requirements.

A detailed Declaration of Conformity can be found on-

line at siemens-home.bsh-group.com/uk/ among the

additional documents on the product page for your

appliance.

2.4 GHz band (2400–2483.5 MHz): Max. 100 mW

UK (NI)

¡ Fitted units must be heat-resistant up to

95 °C, and adjacent unit fronts up to

70 °C.

¡ Do not install the appliance behind a decor-

ative door or the door of a kitchen unit.

There is a risk of overheating.

¡ Cut-out work on the units should be carried

out before installing the appliance. Remove

any shavings. Otherwise, the correct opera-

tion of electrical components may be ad-

versely affected.

¡ The mains socket for the appliance must

either be located in the hatched area

outside of the area where the appliance is

installed.

Any unsecured units must be secured to

the wall using a standard bracket ⁠ .

Declaration of Conformity en