Epson 830p - PowerLite XGA LCD Projector Kullanıcı Kılavuzu - Sayfa 9

Projektör Epson 830p - PowerLite XGA LCD Projector için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Epson 830p - PowerLite XGA LCD Projector 15 sayfaları. Release of emp ns connection for windows & mac upgrade from v2.50 to v2.51
Ayrıca Epson 830p - PowerLite XGA LCD Projector için: Kullanıcı Kılavuzu (42 sayfalar), Kullanım Kılavuzu (36 sayfalar), Kullanım Kılavuzu (47 sayfalar), Hızlı Kurulum (2 sayfalar), Tamamlayıcı Kılavuz (1 sayfalar), Broşür ve Teknik Özellikler (4 sayfalar), Kurulum Kılavuzu (19 sayfalar), Teknik Özet (7 sayfalar), İşlev Kılavuzu (5 sayfalar), Ürün Destek Bülteni (25 sayfalar), Ürün Destek Bülteni (22 sayfalar), Ürün Destek Bülteni (28 sayfalar), Ürün Destek Bülteni (41 sayfalar), Ürün Destek Bülteni (15 sayfalar), Ürün Destek Bülteni (22 sayfalar), Şartname Sayfası (4 sayfalar)

Epson 830p - PowerLite XGA LCD Projector Kullanıcı Kılavuzu
This automatically resets the projector's tracking, sync,
resolution, and position settings.
If vertical bands appear in the projected image and pressing
the
button doesn't correct the problem, hold down the
Auto
button on the projector's control panel while pressing
Shift
either the
or the
Tracking +
If the image appears fuzzy or flickers and pressing the
button doesn't correct the problem, hold down the
button while pressing either the
the projector.
Auto button
button.
Tracking -
Shift
or
button on
Sync +
Sync -

Shutting Down the Projector

When you've finished using the projector, follow the
recommended procedure to shut it down. This extends the life
of the lamp and protects the projector from possible
overheating.
Note: You can set the projector to automatically turn off the
projector lamp and enter "sleep mode" when it has not received
any signals for 30 minutes. This conserves electricity, cools the
projector, and extends the life of the lamp. To start projecting
again, press the P
projector, unplug the power cord. To turn off sleep (standby)
mode, see the User's Guide.
1. Turn off any equipment plugged into the projector.
2. To turn off the projector, press the red P
on the projector or remote control.
You see a confirmation message. (If you don't want to turn
the projector off, press any other button.)
3. Press the P
Auto
twice, the lamp is turned off, and the
orange for about 30 seconds as the projector cools down.
After the projector has cooled, the orange light stays on and
the exhaust fan shuts off.
To turn the projector on again, wait until the orange light
stops flashing. Then press the P
4. If you extended the adjustable front foot, press up on the
blue foot release lever to retract it.
5. Replace the lens cap and unplug the power cord.
Caution: Turn the projector off when not in use. Continuous
24-hour-a-day use may reduce the projector's overall life.
6. If you're using a remote control, set its
.
OFF
10/04
Epson PowerLite 830p
button. If you are done using the
Power
button again. The projector beeps
Power
Power
Power
Epson PowerLite 830p
button
Power
Power button
light flashes
button.
switch to
ON/OFF
9
-