Siemens Family 1650 Çalıştırma ve Kurulum Talimatları - Sayfa 35
Yıkayıcı Siemens Family 1650 için çevrimiçi göz atın veya pdf Çalıştırma ve Kurulum Talimatları indirin. Siemens Family 1650 50 sayfaları. Front-loading washing machine
Sayfayı Yazdır
Fault
Foam coming out of the
detergent dispenser.
Repeated spinning at short
intervals.
The program takes longer
than usual.
Unsatisfactory washing
result.
Detergent residual on the
laundry.
Grey residues on the
laundry.
The laundry was not spun.
Cause
To much detergent.
This is not a fault.
The imbalance compensation system is attempting to balance
the load through repeated spins.
This is not a fault.
The imbalance compensat-
ion system is attempting to
balance the load by distrib-
uting the laundry more
evenly.
The foam detection feature
has activated an additional
rinsing cycle to reduce the
amount of foam.
The degree of dirt was
higher than supposed.
Not enough detergent.
Some phosphate-free
detergents contain
water-insoluble residues
that may appear as light
spots on the laundry.
Dirt accumulation from
ointments, fats or oils.
Large items of clothing
became entangled and
could not be distributed
evenly in the drum.
For safety reasons, the
high-speed final spin cycle
was automatically cancelled.
Action
Mix1 tablespoon of fabric softener
with 1/2 litre of water and pour
into chamber I of the detergent
dispenser.
Reduce the amount of detergent
next time.
Wash large and small items
together to reduce imbalances.
Add a more appropriate amount
of detergent next time.
Select a more suitable program.
Add detergent according to the
manufacturer's specifications.
,, ,,
Select Rinsing immediately, or
brush off spots when laundry is
dry.
Add the maximum amount of det-
ergent and select the highest
permissible temperature next time.
Always load large and small items
together into the drum.
33