Siemens FX-C Onarım Talimatları - Sayfa 28

Yıkayıcı Siemens FX-C için çevrimiçi göz atın veya pdf Onarım Talimatları indirin. Siemens FX-C 34 sayfaları.

6.11

Shock absorver

The shock absorver is a friction damper with integrated spring.

6.11.1 Disassembly

Required special tool:

13.2 mm drill bit

To prevent damage, remove components in the area of

the damper support!

The dampers can be replaced without removing the outer tub.

►

Drill plug-in spindle head 30 mm deep.

►

Press out the plug-in spindle towards the rear.

209_58300000115677_ara_en_f.doc – 26.03.08

Mat. Nr: 340700

6.11.2 Assembly

►

Insert bushings into the eye of the damper.

►

Insert damper into the support on the outer tub.

►

From the rear insert a screw with the flattened washer.

►

Insert screw with centring washer and secure with the hex

lock nut.

Seite 28 von 34