Siemens FX-C Onarım Talimatları - Sayfa 31
Yıkayıcı Siemens FX-C için çevrimiçi göz atın veya pdf Onarım Talimatları indirin. Siemens FX-C 34 sayfaları.
Sayfayı Yazdır7
FAULT DIAGNOSTICS
7.1
Appliance stability
Fault details
Appliance is not stable
7.2
Washing results
Fault details
Washing is not clean
Does not wash clean or not clean enough
(allergy sufferer)
7.3
Time skips
Fault details
Running times and time skips.
209_58300000115677_ara_en_f.doc – 26.03.08
Cause
Incorrect installation
Cause
Detergent, load, programme selection, dosage,
pretreatment
Does not heat up or insufficiently.
Detergent, load, programme selection, dosage
Cause
Adjust the control to the influencing variables
for the wash cycle.
Remedial action
Advise customer,
see Installation chapter
Remedial action
See general repair instructions
58300000002975.
Test heating circuit with test programme;
if required, replace defective component.
See general repair instructions
58300000002975.
Remedial action
Advise customer, see also module /
remaining running time calculation.
Seite 31 von 34