Cisco 7910 Series Başlangıç Kılavuzu - Sayfa 16

IP Telefon Cisco 7910 Series için çevrimiçi göz atın veya pdf Başlangıç Kılavuzu indirin. Cisco 7910 Series 34 sayfaları. Getting started guide
Ayrıca Cisco 7910 Series için: Hızlı Referans (2 sayfalar)

Sayfayı Yazdır

Auto-Registering Your Phone Using TAPS

Note

Step 1

Step 2

Step 3

Step 4

Getting Started with the Cisco IP Phone 7910 Series

2-6

Your administrator may ask you to auto-register your Cisco IP Phone using TAPS,

the Tool for Auto-Registered Phones Support. TAPS might be used either for a

new phone or to replace an existing phone.

Only follow this procedure if your phone administrator asks you to.

Procedure

If the phone is not already installed, see the

to the Network" section on page 2-3

available.

After you plug the phone into a port, the phone automatically registers and

displays a number.

Dial the TAPS extension provided by your system administrator.

Follow the voice prompts to enter your personal extension number (provided by

your system administrator), followed by #. Listen to the voice prompts to

determine if you need to enter the entire number, including area code.

Hang up the phone.

The phone resets and displays your extension number.

Chapter 2

Installing the Cisco IP Phone 7910 Series

"Installing the Phone and Connecting

for instructions on installing the phone

78-11443-02