Siemens WM..T SERIES Kullanım Kılavuzu ve Kurulum Talimatları - Sayfa 24
Yıkayıcı Siemens WM..T SERIES için çevrimiçi göz atın veya pdf Kullanım Kılavuzu ve Kurulum Talimatları indirin. Siemens WM..T SERIES 40 sayfaları.
Operating the appliance
en
Select programme/switch on
the appliance
If you have activated the
Note:
childproof lock, you must first deactivate
it before you can set a program.
~ Page 26
Use the program selector to select the
required program. The program selector
can be rotated in either direction.
The appliance is switched on.
The following default settings and
program information for the selected
program appear in the display panel
Temperature*,
■
The maximum recommended load
■
and the duration of the program
(alternately)
Energy consumption*.
■
*depending on the model
Change the programme
default settings
You can use the default settings or
change them.
To do this, repeatedly select the
corresponding button until the required
setting is displayed.
The settings are activated without
needing to be confirmed.
They are not saved when the appliance
is switched off.
~ "Programme default settings"
on page 21
Overview of programmes ~
Supplementary sheet for the operating
and installation instructions.
24
Select additional programme
settings
By selecting additional settings, you can
better adapt the washing process to
your items of laundry.
The settings can be selected or
deselected depending on the
programme progress.
The indicator lamp for the button lights
up if a setting is active.
The settings are not saved when the
appliance is switched off.
~ "Additional programme settings"
on page 22
Overview of programmes ~
Supplementary sheet for the operating
and installation instructions.
Placing laundry into the drum
:
Warning
Danger of death!
Items of laundry pretreated with
cleaning agents that contain solvents,
e.g. stain remover/cleaning solvent,
may cause an explosion after being
loaded into the washing machine.
Hand-rinse items of laundry thoroughly
beforehand.
Notes
Mix items of laundry of varying sizes.
■
Laundry items of different sizes
distribute themselves better during
the spin cycle. Individual items of
laundry may lead to imbalances.
Observe the specified maximum
■
load. Overfilling has a negative
impact on the washing result and
promotes creasing.