Siemens WM10K260IN Kullanım Kılavuzu ve Kurulum Talimatları - Sayfa 17
Yıkayıcı Siemens WM10K260IN için çevrimiçi göz atın veya pdf Kullanım Kılavuzu ve Kurulum Talimatları indirin. Siemens WM10K260IN 40 sayfaları.
After the start, the preselected time e.g.
8 h is displayed and the time counts
down to the start of the wash
programme. The programme duration is
then displayed, e.g. 2:30
(hours:minutes).
Changing the preselected time:
You can change the preselected time
after the start of the programme as
follows:
Press Start/Reload ! .
1.
Press the (Ready in) 5 button
2.
repeatedly until the required number
of hours is displayed.
Press the Start/Reload ! button.
3.
Adding laundry while the preselected
time continues running:
Press Start/Reload ! .
1.
The symbols YES and v light up on
2.
the display panel. The washing
machine door can be opened and
laundry can be added.
Close the washing machine door.
3.
Press the Start/Reload ! button.
4.
The preselected time continues to
run.
\
Additional programme
settings
speedPerfect (
A d d i t i o n a l p r o g r a m m e s e t t i n g s
For washing in a shorter time with a
washing result comparable to that of the
standard programme.
Notes
Do not exceed the maximum load.
■
Overview of programmes
~ Page 13
speedPerfect ( is preset by
■
default. To deactivate this additional
default setting, press the
speedPerfect ( button. The
indicator light goes off.
Additional programme settings
ecoPerfect ¦
For saving energy with a washing result
comparable to that of the standard
programme.
Easy Iron æ
Special spin sequence with subsequent
fluffing. Gentle final spin – residual
moisture in the laundry slightly
increased.
1
Operating the
appliance
Preparing the washing
O p e r a t i n g t h e a p p l i a n c e
machine
The washing machine must be
Note:
correctly installed and connected.
~ Page 31
Connect the mains plug.
1.
Turn on the water tap.
2.
Open the door.
3.
Check that the drum is completely
4.
drained. Drain if necessary.
en
17