Siemens WM14K267DN Kurulum, Çalıştırma ve Bakım Talimatları - Sayfa 28
Yıkayıcı Siemens WM14K267DN için çevrimiçi göz atın veya pdf Kurulum, Çalıştırma ve Bakım Talimatları indirin. Siemens WM14K267DN 40 sayfaları.
Sayfayı Yazdır
After-sales service
en
Faults
Detergent residues on the
laundry.
NO appears on the dis-
play panel in reload
mode.
YES appears on the dis-
play panel in reload
mode.
The colon in the "Ready
in" display (:) flashes on
the display panel.
The single dot (.) flashes. The undervoltage has caused the wash programme to be extended.
If you cannot correct a fault yourself (after switching off/on) or a repair is required:
Set the programme selector to Off. The appliance is switched off.
■
Unplug the mains plug from the socket.
■
Turn off the tap and call the after-sales service .
■
4
After-sales service
e s
r - s a l
A f t e
If you cannot correct the fault yourself,
(see section, Faults and what to do
about them) ~ Page 25, please
contact our after-sales service. ~
Cover page
We will always find an appropriate
solution in order to avoid unnecessary
visits by engineers.
Please give the after-sales service the
product number (E no.) and the
production number (FD) of the
appliance.
Product number
You can find this information,
*depending on the model:
28
Cause/remedial action
Occasionally, phosphate-free detergents contain water-insoluble residues.
■
Select Rinse q or brush the laundry after washing.
■
Water level too high. Not possible to add laundry. Close the washing
■
machine door immediately, if necessary.
To continue the programme, press Start/Reload !.
■
The washing machine door is unlocked. It is possible to add laundry.
The mains voltage is too low.
Production number
On the inside of the washing machine
door*/in the opened service flap* and
on the rear of the appliance.
c e
s e r v i
Trust the expertise of the
manufacturer.
Contact us for assistance. By doing so,
you will ensure that the repairs are
carried out by trained service personnel
using genuine spare parts.