Epson AP-60 - Projector Sound Solution Kurulum Kılavuzu - Sayfa 14

Projektör Epson AP-60 - Projector Sound Solution için çevrimiçi göz atın veya pdf Kurulum Kılavuzu indirin. Epson AP-60 - Projector Sound Solution 28 sayfaları. Projector sound solution
Ayrıca Epson AP-60 - Projector Sound Solution için: Kullanıcı Kılavuzu (28 sayfalar), Manuel (5 sayfalar), Bağlantı Kılavuzu (1 sayfalar), Parça Listesi (1 sayfalar), Broşür ve Teknik Özellikler (4 sayfalar), Ürün Destek Bülteni (8 sayfalar)

Install the AP-60

Locate the following parts:

•

AP-60

•

Lower bracket

•

M47.5 jam nut

•

M10 bolt and nut

Locate the lower bracket and M47.5 jam nut and have them close by.

Before attaching the AP-60 to the mounting pipe, feed the projector's power and video cables through the

cable channel as shown below.

Slide the AP-60 and the lower bracket onto the mounting pipe with the audio control panel facing the front

of the room. The lower bracket's cutout should line up with the cable channel on the bottom of the AP-60.

Secure the lower bracket with the M47.5 jam nut as shown below. Do not attach the M10 bolt and nut at

this time.

Lower bracket

cutout

Lower bracket

M47.5 jam nut