Siemens XQG80-WM12P1681W Kullanım Kılavuzu ve Kurulum Talimatları - Sayfa 24
Yıkayıcı Siemens XQG80-WM12P1681W için çevrimiçi göz atın veya pdf Kullanım Kılavuzu ve Kurulum Talimatları indirin. Siemens XQG80-WM12P1681W 40 sayfaları.
Sayfayı Yazdır
Cleaning and maintenance
en
Drainage hose on the siphon
blocked
Turn the programme selector to
1.
(Off). Pull out the mains plug.
$
Residual water may run out!
Note:
Loosen hose clip, carefully remove
2.
drainage hose.
Clean drainage hose and siphon
3.
spigot.
Re-attach drainage hose and secure
4.
connection point with hose clip.
Filter in the water inlet hose
blocked
First, release water pressure in the
supply hose:
Turn off the tap!
1.
Select any programme (except
2.
(Spin) programme).
Select
3.
Leave programme for
approx. 40 seconds.
Switch off the appliance. Pull out the
4.
mains plug.
Clean the filter:
5.
Disconnect the hose from the water
tap.
Clean filter with small brush.
24
I (Start/Pause).
and/or:
Remove hose from the rear of the
appliance.
Take out filter with pliers and clean.
Connect the hose and check for
6.
leaks.