Cisco 7940G Yönetim Kılavuzu - Sayfa 24

IP Telefon Cisco 7940G için çevrimiçi göz atın veya pdf Yönetim Kılavuzu indirin. Cisco 7940G 29 sayfaları. Ios telephony services ip phone
Ayrıca Cisco 7940G için: Kullanıcı Kılavuzu (21 sayfalar), Kullanıcı Kılavuzu (25 sayfalar), Veri Sayfası (7 sayfalar), Manuel (35 sayfalar), Hızlı Referans (2 sayfalar), Kullanıcı Kılavuzu (15 sayfalar), Hızlı Referans Kılavuzu (2 sayfalar), Kullanıcı Kılavuzu (20 sayfalar), Telefon Kılavuzu (17 sayfalar), Yönetici El Kitabı (15 sayfalar), Kullanıcı Kılavuzu (16 sayfalar), Referans Kılavuzu (24 sayfalar), Manuel (21 sayfalar), Kurulum Kılavuzu (12 sayfalar), Kullanıcı Kılavuzu (10 sayfalar)

Sayfayı Yazdır

How to Create Dial Plans

For more information on Bellcore tones, refer to Bellcore GR-506-CORE. For more information on tones

Note

in BTS 10200 Softswitch features, refer to the Cisco BTS 10200 Softswitch website at

http://www.cisco.com/en/US/partner/products/hw/vcallcon/ps531/index.html.

Prerequisites

Ensure that your dial plans adhere to the following:

•

–

Specify which dial plan a phone is to use by specifying the path to the dial plan in the dial_template

•

parameter. Define the dial_template parameter in either the default configuration file or a

phone-specific configuration file.

Note

Procedure

Using an ASCII text editor such as vi, open a new file.

Step 1

Type the following to indicate the start of the dial-plan template:

Step 2

Step 3

For each of the numbering schemes that you require, add the following string to the template, each

starting on a separate line:

TEMPLATE MATCH="pattern" Timeout="sec" User="type" Rewrite="xxx" Route="route" Tone="tone"

Arguments are as follows:

Argument

TEMPLATE MATCH="pattern"

Timeout="sec"

User="type"

Cisco Unified IP Phone 7960G and 7940G Administration Guide for Release 8.0 (SIP)

3-24

They are written with the understanding that rules are matched from start to finish with the

longest matching rule taken as the one to use. Matches against a period are not counted as part

of the longest length.

They are in XML format.

They are stored on your TFTP server.

To simplify maintenance and control, define this parameter in the default configuration file.

Define it in a phone-specific configuration file only if that phone needs to use a different dial

plan than the one being used by the other phones in the same system.

Description

Dial-pattern string to match. You can use the following wildcards:

A period (.) matches any character.

•

An asterisk (*) matches one or more characters.

•

A comma (,) causes the phone to generate a secondary dial tone.

Time, in seconds, before the system times out and dials the number

as entered by the user. To have the number dial immediately,

specify 0.

Tag to be added automatically to the dialed number. Valid values are

IP and Phone. This tag is not case sensitive.

Chapter 3

Initializing Cisco Unified IP Phones

OL-7890-01