Cisco 7940G Yönetim Kılavuzu - Sayfa 3

IP Telefon Cisco 7940G için çevrimiçi göz atın veya pdf Yönetim Kılavuzu indirin. Cisco 7940G 29 sayfaları. Ios telephony services ip phone
Ayrıca Cisco 7940G için: Kullanıcı Kılavuzu (21 sayfalar), Kullanıcı Kılavuzu (25 sayfalar), Veri Sayfası (7 sayfalar), Manuel (35 sayfalar), Hızlı Referans (2 sayfalar), Kullanıcı Kılavuzu (15 sayfalar), Hızlı Referans Kılavuzu (2 sayfalar), Kullanıcı Kılavuzu (20 sayfalar), Telefon Kılavuzu (17 sayfalar), Yönetici El Kitabı (15 sayfalar), Kullanıcı Kılavuzu (16 sayfalar), Referans Kılavuzu (24 sayfalar), Manuel (21 sayfalar), Kurulum Kılavuzu (12 sayfalar), Kullanıcı Kılavuzu (10 sayfalar)

Sayfayı Yazdır

Chapter 3

Initializing Cisco Unified IP Phones

Refer to the

Note

Overview of the Initialization Process

For an overview of the initialization process, refer to Cisco IP Phone 7960 and 7940 Firmware Upgrade

Matrix, which is available at this URL:

http://www.cisco.com/univercd/cc/td/doc/product/voice/c_ipphon/english/ipp7960/addprot/mgcp/

frmwrup.htm

Basic phone configuration follows these high-level steps:

Download the required files from Cisco.com to the TFTP server as described in "Prerequisites".

Step 1

If you are configuring SIP parameters via a TFTP server, create and store the configuration files as

Step 2

described in

Phone-Specific Configuration

manually configure the required parameters as described in

Step 3

If you are using DCHP to configure the phone network settings, configure the required network

parameters on your DHCP server as described in "Prerequisites". If you are not using DHCP to configure

network parameters, manually configure the required network parameters as described in

Network Parameters

Connect the phone to the network as described in

Step 4

power supply as described in

About Configuration Files

Configuration files reside in a TFTP server subdirectory (you can specify the location of this

subdirectory with the tftp_cfg_dir parameter). For more information, refer to the

IP Phones Firmware Upgrade

Be sure to customize configuration files before you power up the phone. When powered up, the phone

Note

automatically loads parameters stored in flash memory and then requests configuration files from the

TFTP server.

There are two configuration files that can be downloaded from the TFTP server:

•

The name of each phone-specific configuration file is unique and is based on the MAC address of the

phone. The format of the filename must be SIPXXXXYYYYZZZZ.cnf, where XXXXYYYYZZZZ is the MAC

address of the phone. The MAC address must be in uppercase; the .cnf extension must be in lowercase

(for example, SIP00503EFFD842.cnf).

OL-7890-01

Cisco 7940 and 7960 IP Phones Firmware Upgrade Matrix

"How to Customize the Default Configuration File"

Manually".

"Connecting the Phone to

A default configuration file, named SIPDefault.cnf, which is downloaded by all phones.

A phone-specific configuration file, which is downloaded by a specific phone after the default

configuration file.

Cisco Unified IP Phone 7960G and 7940G Administration Guide for Release 8.0 (SIP)

File". If you are not configuring the SIP parameters via a TFTP server,

Appendix C, "Connection

Power".

Matrix.

Overview of the Initialization Process

for additional prerequisites.

and

"How to Customize a

"Configuring the SIP Parameters

Specifications", and to a

Cisco 7940 and 7960

Manually".

"Configuring

3-3