Cisco 7940G Yönetim Kılavuzu - Sayfa 7

IP Telefon Cisco 7940G için çevrimiçi göz atın veya pdf Yönetim Kılavuzu indirin. Cisco 7940G 29 sayfaları. Ios telephony services ip phone
Ayrıca Cisco 7940G için: Kullanıcı Kılavuzu (21 sayfalar), Kullanıcı Kılavuzu (25 sayfalar), Veri Sayfası (7 sayfalar), Manuel (35 sayfalar), Hızlı Referans (2 sayfalar), Kullanıcı Kılavuzu (15 sayfalar), Hızlı Referans Kılavuzu (2 sayfalar), Kullanıcı Kılavuzu (20 sayfalar), Telefon Kılavuzu (17 sayfalar), Yönetici El Kitabı (15 sayfalar), Kullanıcı Kılavuzu (16 sayfalar), Referans Kılavuzu (24 sayfalar), Manuel (21 sayfalar), Kurulum Kılavuzu (12 sayfalar), Kullanıcı Kılavuzu (10 sayfalar)

Sayfayı Yazdır

Chapter 3

Initializing Cisco Unified IP Phones

How to Customize the Default Configuration File

#(0-off (default), 1-on, 2-off with no user control, 3-on with no user control)

dnd_control: 0;

# Caller ID Blocking

#(0-disabled, 1-enabled, 2-disabled no user control, 3-enabled no user control)

callerid_blocking: 0; (Default is 0 - disabled and sending all calls as anonymous)

# Anonymous Call Blocking

#(0-disabled, 1-enabled, 2-disabled no user control, 3-enabled no user control)

anonymous_call_block: 0; (Default is 0 - disabled and blocking of anonymous calls)

# DTMF AVT Payload (Dynamic payload range for AVT tones - 96-127)

dtmf_avt_payload: 101; Default 101

# Sync value of the phone used for remote reset

sync: 1; Default 1

####### New Parameters added in Release 2.1 #######

# Backup Proxy Support

proxy_backup: ""; Dotted IP of Backup Proxy

proxy_backup_port: 5060; Backup Proxy port (default is 5060)

# Emergency Proxy Support

proxy_emergency: ""; Dotted IP of Emergency Proxy

proxy_emergency_port: 5060; Emergency Proxy port (default is 5060)

# Configurable VAD option

enable_vad: 0; VAD setting 0-disable (Default), 1-enable

####### New Parameters added in Release 2.2 ######

# NAT/Firewall Traversal

nat_enable: 0; 0-Disabled (default), 1-Enabled

nat_address: ""; WAN IP address of NAT box (dotted IP or DNS A record only)

voip_control_port: 5060; UDP port used for SIP messages (default - 5060)

start_media_port: 16384; Start RTP range for media (default - 16384)

end_media_port: 32766; End RTP range for media (default - 32766)

nat_received_processing: 0; 0-Disabled (default), 1-Enabled

# Outbound Proxy Support

outbound_proxy: ""; restricted to dotted IP or DNS A record only

outbound_proxy_port: 5060; default is 5060

####### New Parameter added in Release 3.0 #######

# Allow for the bridge on a 3way call to join remaining parties upon hangup

cnf_join_enable: 1; 0-Disabled, 1-Enabled (default)

####### New Parameters added in Release 3.1 #######

# Allow Transfer to be completed while target phone is still ringing

semi_attended_transfer: 1; 0-Disabled, 1-Enabled (default)

# Telnet Level (enable or disable the ability to Telnet into the phone)

telnet_level: 1; 0-Disabled (default), 1-Enabled, 2-Privileged

####### New Parameters added in Release 4.0 #######

# XML URLs

services_url: ""; URL for external Phone Services

directory_url: ""; URL for external Directory location

logo_url: ""; URL for branding logo to be used on phone display

Cisco Unified IP Phone 7960G and 7940G Administration Guide for Release 8.0 (SIP)

3-7

OL-7890-01