Siemens SIMATIC S7-1200 Manuel - Sayfa 14

Anahtar Siemens SIMATIC S7-1200 için çevrimiçi göz atın veya pdf Manuel indirin. Siemens SIMATIC S7-1200 31 sayfaları. Controlling several fans (ebm-papst) via modbus rtu
Ayrıca Siemens SIMATIC S7-1200 için: Manuel (30 sayfalar), Kullanım Talimatları Kılavuzu (36 sayfalar), Güvenlik Programlama Manualline (48 sayfalar), Manuel (40 sayfalar), Manuel (17 sayfalar), Manuel (49 sayfalar), Manuel (20 sayfalar)

Sayfayı Yazdır
Siemens SIMATIC S7-1200 Manuel

4 Configuration and Settings

Configuration and Settings
4
The step tables below describe how to configure the S7-1200 and the
SINAMICS S120 drive. The configuration of the operator panel is not described in
this chapter.
A requirement is that the software listed in
4.1

Creating the project configuration

Table 4-1: Creating the project configuration
No.
Action
1.
Open TIA Portal and create a new
project.
Double-click on "Add new device".
2.
3.
Add your desired controller:
Select "Controller".
1.
2.
Select the desired CPU.
Then click on "OK".
3.
Drehzahlachse mit SINA_SPEED
Entry-ID: 109485727,
V1.0,
06/2017
Table 2-2
is installed on your PC/PG.
Remark
14