Epson BrightLink 1485Fi Kullanım Kılavuzu Eki - Sayfa 20
Projektör Epson BrightLink 1485Fi için çevrimiçi göz atın veya pdf Kullanım Kılavuzu Eki indirin. Epson BrightLink 1485Fi 34 sayfaları.
Sayfayı Yazdır
Details of User Operation Change (Version 2.00)
New Interactive Operation (Version 2.00)
You can use the computer interactive mode for Screen Mirroring source if
your computer is Windows 10 and supports UIBC (User Input Back
Channel).
When connecting using a Screen Mirroring, hold down the Windows key and
press K on your keyboard at the same time, then select Allow mouse,
keyboard, touch, and pen input from this device.
Outputting Screen Mirroring Image to HDMI Out Port
You can output HDCP-disabled Screen Mirroring image to HDMI Out port.
Previous HDMI Out Operation (Version 1.00)
You cannot output Screen Mirroring image to HDMI Out port.
New HDMI Out Operation (Version 2.00)
When you select the Capture setting, you can change the behavior of the
HDMI Out port.
Network > Network Settings > Network Projection > Screen Mirroring
s
> Capture
Enabled allows you to output Screen Mirroring image to the HDMI Out port.
HDCP feature is disabled and you may not be able to project content with
them. If you want to project content with HDCP feature, select Disabled.
Screen Sharing Guidance Screen for Receiving
Projector
When you share the screen, you must specify the IP address of receiving
projector. You can check the IP address by displaying a screen sharing
guidance screen.
Previous Screen Sharing Operation (Version 1.00)
You can check the IP address of the receiving projector on the network
information screen displayed when you press the [LAN] button on the remote
control.
New Screen Sharing Operation (Version 2.00)
On receiving projector, select Screen Sharing on the Home screen, and then
select Receive shared screen. You can check the IP address of the receiving
projector on the displayed guidance screen.
20