Epson BrightLink 1485Fi Kullanım Kılavuzu Eki - Sayfa 32

Projektör Epson BrightLink 1485Fi için çevrimiçi göz atın veya pdf Kullanım Kılavuzu Eki indirin. Epson BrightLink 1485Fi 34 sayfaları.

Solving Miscellaneous Problems

Check the solutions in these sections if you have other problems.

g g Related Links

• "Solving Split Screen Problems"

• "Solving USB Display Problems"

• "Solving User Pattern Saving Problems"

• "Solving Screen Mirroring Problems"

If you cannot operate the split screen feature, try the following solutions.

• If you cannot select the PC Interactivity source, make sure the USB

Display source is not included in one of the input sources. Select a different

input source, if possible.

• The split screen may not appear when you use the Scale feature or the Edge

Blending feature. Turn them off, if possible.

If you cannot project an image using the USB Display feature, try the

following solutions.

• When you use the control pad (ELPHD02), the projector cannot detect the

image signal input from the projector's USB-B port. Connect the USB cable

to the control pad.

If you fail to save a user pattern, try the following solution.

• You cannot save content that is protected by HDCP. Project an unprotected

image and save again.

p.32

If you cannot project a screen mirroring image, try the following solutions.

• If you set the Capture setting to Enabled, the HDCP feature is disabled and

you may not be able to project content with the HDCP feature. Set the

Capture setting to Disabled.

Network > Network Settings > Network Projection > Screen

Mirroring > Capture