Siemens SITRANS LVL100 Kullanım Talimatları Kılavuzu - Sayfa 13

Anahtar Siemens SITRANS LVL100 için çevrimiçi göz atın veya pdf Kullanım Talimatları Kılavuzu indirin. Siemens SITRANS LVL100 32 sayfaları. Vibrating switches
Ayrıca Siemens SITRANS LVL100 için: Kullanım Talimatları Kılavuzu (33 sayfalar), Kullanım Talimatları Kılavuzu (32 sayfalar), Kullanım Talimatları Kılavuzu (32 sayfalar)

Adhesive products

SITRANS LVL100 l CONTACTLESS ELECTRONIC SWITCH

Fig. 5: Marking on the welded socket

Marking

In case of horizontal mounting in adhesive and viscous

products, the surfaces of the tuning fork should be vertical in

order to reduce buildup on the tuning fork. The position of the

tuning fork is indicated by a marking on the hexagon of

SITRANS LVL100. With this, you can check the position of the

tuning fork when screwing it in. When the hexagon touches the

seal, the thread can still be turned by approx. half a turn. This

is suﬃcient to reach the recommended installation position.

In adhesive and viscous products, the surfaces of the tuning

fork should protrude into the vessel to avoid buildup. Therefore

sockets for ﬂanges and mountings bosses should not exceed

a certain length.

Fig. 6: Adhesive products

30mm

Mounting