Siemens SITRANS LVL100 Kullanım Talimatları Kılavuzu - Sayfa 18

Anahtar Siemens SITRANS LVL100 için çevrimiçi göz atın veya pdf Kullanım Talimatları Kılavuzu indirin. Siemens SITRANS LVL100 32 sayfaları. Vibrating switches
Ayrıca Siemens SITRANS LVL100 için: Kullanım Talimatları Kılavuzu (33 sayfalar), Kullanım Talimatları Kılavuzu (32 sayfalar), Kullanım Talimatları Kılavuzu (32 sayfalar)

Set up

6 Set up

The switching status of the electronics can be checked on the

upper part of the housing.

SITRANS LVL100 has an integrated test switch which can be

activated magnetically. Proceed as follows to test the instru-

ment:

à Hold the test magnet (accessory) to the magnet symbol on

the instrument housing

Fig. 9: Function test

The test magnet changes the current switching condition of the

instrument. You can check the change on the signal lamp.

Please note that the connected instruments are activated

during the test.

If SITRANS LVL100 does not switch over after several tests

with the test magnet, you have to check the plug connection

and the connection cable and test the instrument again. If there

is no switching function, the electronics will be defective. In this

case you have to exchange the electronics or return the

instrument to our repair department.

SITRANS LVL100 l CONTACTLESS ELECTRONIC SWITCH