Siemens iQ500 SN56M592AU/82 Kullanım Talimatları Kılavuzu - Sayfa 25

Bulaşık Makinesi Siemens iQ500 SN56M592AU/82 için çevrimiçi göz atın veya pdf Kullanım Talimatları Kılavuzu indirin. Siemens iQ500 SN56M592AU/82 36 sayfaları.

Sayfayı Yazdır

Fault

A different error code is

indicated on the digital

display.

( :

to :

)

Display flashes

Refill indicator for rinse-aid

@ is lit.

Refill indicator for rinse-aid

@ is not lit.

Water is left

in the appliance at the end

of the programme.

Cause

A technical fault has probably

occurred.

Door not closed properly.

No rinse aid.

Refill indicator switched off.

There is still enough rinse aid

available.

Filter system or area under

the filters 1R is blocked.

The programme has not yet

ended.

Fault, what to do?

Remedial action

Switch off appliances with the ON/OFF

switch (. After a short time restart

the appliance.

If the problem recurs, turn off the tap and

pull out the mains plug.

Call customer service and mention the error

code.

Close the door. Ensure that no objects

(utensil, fragrance dispenser) are protruding

over the basket and preventing the door

from closing.

Refill rinse aid.

Activation/deactivation (see chapter Rinse

aid).

Check refill indicator, level.

Clean filters and area underneath (see

Waste water pump).

Wait until programme ends or reset (see

Terminating the programme).

aus