Epson BrightLink 450Wi - Interactive Projector Kurulum El Kitabı - Sayfa 4

Projektör Epson BrightLink 450Wi - Interactive Projector için çevrimiçi göz atın veya pdf Kurulum El Kitabı indirin. Epson BrightLink 450Wi - Interactive Projector 10 sayfaları. Remote control information
Ayrıca Epson BrightLink 450Wi - Interactive Projector için: Buradan Başlayın Kılavuzu (6 sayfalar), Broşür ve Teknik Özellikler (18 sayfalar), Kurulum (5 sayfalar), Montaj Şablonu (1 sayfalar), Boyutsal Çizim (2 sayfalar), Montaj Şablonu (5 sayfalar), Kullanıcı Kılavuzu (25 sayfalar), Hızlı Başlangıç Kılavuzu (2 sayfalar), Kullanma (4 sayfalar), Broşür ve Teknik Özellikler (18 sayfalar)

Sayfayı Yazdır
Epson BrightLink 450Wi - Interactive Projector Kurulum El Kitabı
Epson BrightLink 450Wi / 455Wi
4. Select one of the patterns shown on page 3 or choose
. If you want to create your own pattern, choose
Pattern
. See below for more information.
Pattern
5. Press
to select the pattern you want, then press
Enter
6. Choose
Pattern Display
7. Press
when you're nished displaying the pattern.
Esc

Assigning a Pattern to the User Button

You can assign any of the available patterns to the
remote control, and then display it by simply pressing the
button.
1. In the Settings menu, select the
2. Highlight
User Button
3. Highlight
Pattern Display
4. Press
to exit.
Menu

Creating Your Own Pattern

You can transfer any image from your computer or video source to the
projector and then use it as a pattern. If you assign it to the
button as described above, you can display it any time you want by
simply pressing the
User
Start by displaying the image you want to use from a computer or
other source. Then follow these steps to capture the image and transfer
it to the projector:
1. In the Settings menu, highlight
2. Select
and press
User Pattern
3. When you see a message asking if you want to use the current
image as the pattern, select
4. Press
again.
Enter
to display the pattern.
Pattern Type
and press
.
Enter
and press
.
Enter
button on the remote control.
and press
Pattern
.
Enter
and press
Yes
Enter
Test
User
.
Esc
button on the
User
User
User
.
Enter
.
INSTALLATION HANDBOOK
Remote Control Information
note
When you choose an image
for the user pattern, it erases
any previously used image.
4