Siemens SMI53E05GB/98 Kullanım Kılavuzu - Sayfa 11

Bulaşık Makinesi Siemens SMI53E05GB/98 için çevrimiçi göz atın veya pdf Kullanım Kılavuzu indirin. Siemens SMI53E05GB/98 42 sayfaları.

To change the setting:

1. Press programme button 3.

Each time the button is pressed, the

set value increases by one level;

when the value of :

reached, the display jumps back

to :

(off).

2. Press START button h.

The chosen setting has now been

stored.

Water hardness table

Always refill with special salt

immediately before switching on the

appliance. This ensures that overrun

special salt solution is immediately

washed out and does not corrode the

rinsing tank.

Water softening system/Special salt

has been

1. Open the screw-type cap of the

compartment 1R.

2. Fill the tank with water (only required

when switching on the appliance for

the first time).

3. Then add dishwasher salt (not table

salt or tablets).

The water is displaced and runs out.

As soon as the salt refill indicator @

on the fascia is lit, top up the salt.

* depending on model

Using detergents with salt

component

D e t e r g e n t s w i t h s a l t c o m p o n e n t

If combined detergents with a salt

component are used, salt can usually be

omitted up to a water hardness of

21° dH (37° fH, 26° Clarke, 3.7 mmol/

l). If the water hardness is over 21° dH,

special salt must be used.