Cisco 7942G - Unified IP Phone VoIP Kullanıcı Kılavuzu - Sayfa 6

IP Telefon Cisco 7942G - Unified IP Phone VoIP için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Cisco 7942G - Unified IP Phone VoIP 16 sayfaları. Unified communications manager 9.0 (sccp and sip)
Ayrıca Cisco 7942G - Unified IP Phone VoIP için: Kullanıcı Kılavuzu (23 sayfalar), Veri Sayfası (5 sayfalar), Kurulum Kılavuzu (12 sayfalar), Kullanıcı Kılavuzu (6 sayfalar), Kullanıcı Kılavuzu (4 sayfalar), Yönetim Kılavuzu (12 sayfalar), Kullanıcı Kılavuzu (13 sayfalar), Kullanıcı Kılavuzu (17 sayfalar), Kullanıcı Kılavuzu (12 sayfalar), Manuel (11 sayfalar), Kullanıcı Kılavuzu (6 sayfalar), Yönetim Kılavuzu (16 sayfalar), Sorun Giderme ve Bakım (27 sayfalar)

CLOUD VOICE S Service – Cisco IP Phone 7942G

Preference Setup

2.1

1. Press the Settings button.

2. Use the Scroll keys to highlight Ring Type in the

Settings menu.

3. Press the Select soft key to display a list of Ring

Types.

4. Press the Scroll key to highlight one of the

available Ring Types.

5. Press the Play soft key to hear a Ring Type.

6. Press the Select and then press the OK soft key to

choose the Ring Type.

7. Press the Save soft key to save your selection and

exit to the main menu.

2.2

1. While the phone is not in use, press the Up or Down Volume keys to adjust

volume to the desired level.

2. When the phone is ringing, press the Up or Down Volume keys to adjust volume

to the desired level.

3. To save the volume setting, press the Settings button and then press the Save

soft key.

2.3

1. During a call, press the Volume key to increase or decrease the volume of your

Handset, Speakerphone or Headset.

2. To save the volume setting, press the Settings button and then press the Save

soft key.

Note: The volume setting will only be changed while the respective feature is in use.

2.4

1. Press the Settings button.

2. Use the Scroll button to highlight Contrast in the Setting menu.

3. Press the Select soft key to select the Contrast option.

4. Press the Up or Down soft key to set LCD contrast.

5. Press the OK soft key to accept the changes.

6. Press the Save soft key to save the new contrast setting and exit the Settings

menu.

Version 5.0