Epson BrightLink 485Wi Buradan Başlayın Kılavuzu - Sayfa 2

Projektör Epson BrightLink 485Wi için çevrimiçi göz atın veya pdf Buradan Başlayın Kılavuzu indirin. Epson BrightLink 485Wi 6 sayfaları. Lamp and status information
Ayrıca Epson BrightLink 485Wi için: Kullanım Kılavuzu (47 sayfalar), Bağlantı Kılavuzu (6 sayfalar), Kurulum Kılavuzu (5 sayfalar), Montaj Şablonu (5 sayfalar), Teknik Özellikler (6 sayfalar), Uygunluk Beyanı (4 sayfalar), Teknik Özellikler (6 sayfalar), Kurulum El Kitabı (3 sayfalar), Kurulum El Kitabı (2 sayfalar), Kurulum El Kitabı (5 sayfalar), Manuel (21 sayfalar), Buradan Başlayın Kılavuzu (6 sayfalar)

Sayfayı Yazdır

Epson BrightLink 485Wi Buradan Başlayın Kılavuzu

Connect Your Computer and

Turn on the Projector

Connect the USB cable directly to any available

USB port on your computer.

C onnect an HDMI or VGA cable from the projector

to your computer.

Turn on the projector by pressing the red

button on the remote control.

In Windows

, you may see messages about device

drivers or new hardware.

Depending on how your computer is connected to

the projector, you may need to select your source

for computer interaction.

Press the Menu button on the remote control, select

the Extended menu, and press Enter.

Select the Easy Interactive Function setting and

press Enter.

USB cable

HDMI

VGA

power

Select Use Source and press Enter.

Select the source where your computer is

connected. For example, if your computer is

connected with a VGA cable to the projector's

Computer1 port, select Computer1. If your

computer is connected with an HDMI cable, select

HDMI.

If you don't know which source to select, check

with your school's tech coordinator.

D isplay an image from your computer. If the image

doesn't appear, try one of the following:

•

On some Windows laptops, you may need to

hold down the Fn key on the keyboard and press

F7 or the function key that lets you display on

an external monitor. It may have an icon such as

, or it may be labelled CRT/LCD.

•

On a Mac

, you may need to open System

Preferences and select Displays. Select the

VGA Display or Color LCD option if necessary,

then click the Arrange or Arrangement tab,

and select the Mirror Displays check box.

•

Try pressing the Source Search button on the

remote control.