Siemens ED8 FS11E Series Kullanım Kılavuzu - Sayfa 27
Hob Siemens ED8 FS11E Series için çevrimiçi göz atın veya pdf Kullanım Kılavuzu indirin. Siemens ED8 FS11E Series 36 sayfaları. Induction hob with integrated ventilation system
Removing metal grease filter
The metal grease filters filter the grease out of kitchen
steam. To keep them in good working order, the filters
should be cleaned at least once a month.
Take the filter cover off.
1.
Make sure that the filter cover does not fall
Note:
and damage the hob.
Take the metal grease filter and the container out.
2.
Fat may accumulate in the bottom of the
Note:
container.Hold the metal grease filter level to prevent
fat from dripping out.
Press down on the two catches on either side of the
3.
container to separate the metal grease filter from the
container.
Empty the container if necessary.
4.
Clean the metal grease filter and filter cover.
5.
After removing the metal grease filter, clean the
6.
inside of the appliance.
Droplets of water may form on the fan wheel. This
Note:
is normal and occurs as a result of the cooking vapours
condensing. It is not a safety hazard and there is no risk
of damage. The electronic components in the appliance
are protected.
Cleaning the metal mesh grease filters
Notes
Do not use aggressive, acidic or alkaline cleaning
■
products.
The metal grease filter can be cleaned in the
■
dishwasher or by hand.
By hand:
You can use a special degreaser to remove
Note:
stubborn dirt (article no. 00311297). This can be
ordered through our online shop.
Soak the metal grease filter in hot soapy water.
■
Clean the metal grease filter with a brush and then
■
rinse it thoroughly.
Leave the metal grease filter to drain.
■
In the dishwasher:
Do not clean the metal grease filter together with
■
cookware if heavily soiled.
Place the metal grease filter in the dishwasher,
■
leaving plenty of space around it. Do not trap the
metal grease filter.
For best results, place the metal grease filter in the
■
dishwasher filter side down.
Fitting and cleaning other appliance components
Also clean the inside of the hob extractor system
regularly. You can use a special degreaser to remove
stubborn dirt (article no. 00311297).
Remove the filter cover and clean it with a damp
1.
cloth.
Remove the metal grease filter and container.
2.
Press down on the two catches on either side of the
3.
container to separate the metal grease filter from the
container.
Cleaning
en
27