Siemens EH..TA11E Kullanım Kılavuzu - Sayfa 9
Hob Siemens EH..TA11E için çevrimiçi göz atın veya pdf Kullanım Kılavuzu indirin. Siemens EH..TA11E 12 sayfaları.
Sayfayı Yazdır
2
Press the + or - symbol for the time program
function.The basic settings are displayed.
+ symbol: 30 minutes
- symbol:10 minutes
3
Set the required time using the + or - symbol.
After a few seconds, the timer will start to count down.
The last programmed cooking time will appear on the
display.
Once the time has elapsed
The hotplate switches off once this time has elapsed. A
warning beep sounds.
When the j symbol is pressed, the indicators go out and
the beep stops..
Correcting the time
ress the j symbol until the R indicator lights up on the
required hotplate.
The cooking time can be changed using the
+ or - symbols for the time program function.
Cancelling the automatic off function
Press the j symbol until the R indicator lights up on the
required hotplate. Then press the - symbol for the time
program function until kk is displayed.
The R indicator goes out.
Suggestions and warnings
Any cooking time can be to programmed up to 99
minutes.
After a power cut, the time program function will no
longer be activated.
Kitchen timer
You can use the kitchen timer to set a time of up to
99 minutes. It runs independently of all the other settings.
Setting procedure
Touch the 0 symbol repeatedly until the S indicator
1
for the kitchen timer lights up. lights up on the
timer display.
2
Use the + or - symbol to set the time. .
The timer starts counting down after a few seconds.
When the cooking time has elapsed
A signal sounds once the time has elapsed. lights up
on the timer display. The S indicator for the kitchen timer
lights up brightly. After 10 seconds, the indicator
switches off.
Changing the time
Touch the 0 symbol repeatedly until the S indicator for
the kitchen timer lights up.
Use the + or - symbol to set the time.
Automatic time limit
If a hotplate is in use for a long time without the setting
being changed, the automatic time limit is activated.
The hotplate stops heating. F and 8 flash alternately on
the hotplate display.The display goes out when you touch
any control panel.
You can make new settings.When the time limit is
activated depends on the heat setting selected (1 to 10
hours).
Basic settings
Your appliance has various basic settings. You can adapt
these settings to your needs.
Indicator
Function
o b
Automatic childproof lock
Switched off.*
Switched on.
o c
Audible signal
Confirmation signal and operation error
signal switched off.
Only operation error signal switched on.
Confirmation signal and operation error
signal switched on.*
o f
Automatic timer
Switched off.*
Cooking time after which the hotplates
switch off.
o g
Duration of the timer end signal
10 seconds.*
30 seconds.
1 minute.
o h
Power Management Function
b = bkkk W minimum power
b. - j = from bfkk to jkkk W
j. = jfkk W maximum power
o k
Reset to basic setting
Switched off.
Switched on.
*
Basic setting
Accessing the basic settings
1
Switch on the hob using the main switch.
Press the Ñ symbol within the next 10 seconds
2
until a beep sounds to confirm this and o b
on the hotplate display to the right of the Ñ symbol
(see illustration).
flashes
9