Siemens EH6..ME3 SERIES Kullanım Kılavuzu - Sayfa 16

Hob Siemens EH6..ME3 SERIES için çevrimiçi göz atın veya pdf Kullanım Kılavuzu indirin. Siemens EH6..ME3 SERIES 20 sayfaları.
Ayrıca Siemens EH6..ME3 SERIES için: Kullanım Kılavuzu (20 sayfalar)

Automatic timer

With this function you may select a cooking time for all
hotplates. Once a hotplate is switched on, the selected time will
begin to count down. The hotplate will automatically switch off
when the cooking time has elapsed.
Instructions on activating the timer are found in the chapter
entitled "Basic settings".
Note: The cooking time of a zone may be cancelled or
changed:
Press the
symbol several times until the required
0
indicator lights up. Change the cooking time in the
programming panel, or set to

The timer

The timer can be set for periods of up to 99 minutes. It is
independent of the other settings. This function does not
automatically switch off a hotplate.

Automatic time limitation

If the hotplate remains in use for a long time and no changes
are made in the settings, the automatic time limitation function
is triggered.
The hotplate stops heating. On the hotplate display,
flash alternately.

Cleaning lock function

Cleaning the control panel while the hob is on may change the
settings.
In order to avoid this, the hob has a cleaning lock function.
Press the
#
symbol. A signal sounds. The control panel is
locked for 35 seconds. The surface of the control panel can
now be cleaned without risk of changing the settings.

Basic settings

The device has several basic settings. These settings may be
adapted to the user's individual needs.
Indicator
Function
Childproof lock
™‚
Deactivated.*
Activated.
Sound signals
™ƒ
Confirmation beep and error signal deactivated.
Only confirmation beep deactivated.
All signals activated.*
ƒ
Height setting
™...
-
ƒ
Reduction.
Basic setting.*
...
-
Š
Volume.
*Factory settings
16
x
.
‹‹
and
"
Programming
Press the
0
symbol several times until the
1.
up.
‹‹
lights up in the time program function display.
Select the desired time in the programming panel.
2.
The timer starts to count down after a few seconds.
Once the time has elapsed
A warning beep sounds. In the time program function display
is shown, and the
‹‹
the indicators turn off.
Pressing the
symbol turns off the indicators and stops the
0
beep.
Changing or cancelling the time
Press the
0
symbol several times until the
up. Change the cooking time in the programming panel, or set
to
‹‹
.
The indicator goes out when any symbol is pressed. The
hotplate can now be reset.
When the automatic time function is used, it is governed by the
selected power level (from 1 to 10 hours).
Note: The lock does not affect the main switch. The hob may
be switched off when desired.
W
indicator comes on. After 10 seconds
W
W
indicator lights
indicator lights