Siemens EH8..FM Series Kullanım Kılavuzu - Sayfa 13

Hob Siemens EH8..FM Series için çevrimiçi göz atın veya pdf Kullanım Kılavuzu indirin. Siemens EH8..FM Series 16 sayfaları.
Ayrıca Siemens EH8..FM Series için: Kullanım Kılavuzu (21 sayfalar)

Siemens EH8..FM Series Kullanım Kılavuzu
Indicator
Malfunction
The indicators
The control panel is damp or an object is
blink
resting on it.
Electronic system malfunction.
+ number /
š
+ number /
+
¡
number
There is an internal operating error.
/
"‹
The electronic system has overheated and
/
"†
the corresponding hotplate has been
switched off.
The electronic system has overheated and
"...
all hotplates have been switched off.
Supply voltage outside normal operating
—‚
limits.
The hotplate has overheated and has
/
—ƒ
—„
switched off in order to protect its cooking
surface.
* If the warning persists call the Technical Assistance Service.
Do not rest hot pans on the control panel.

Normal noise while the appliance is working

Induction heating technology is based on the creation of
electromagnetic fields that generate heat directly at the base of
the pan. Depending on how the pan has been manufactured,
certain noises or vibrations may be produced such as those
described below:
A deep humming sound as in a transformer
This noise is produced when cooking on a high power level. It
is caused by the amount of energy transferred from the hob to
the pan. The noise disappears or becomes faint when the
power level is lowered.
A low whistling sound
This noise is produced when the pan is empty. The noise
This noise is produced when the pan is empty. The noise
This noise is produced when the pan is empty. The noise
disappears when water or food is added to the pan.
A crackling sound
This noise occurs in pans which are made from different
This noise occurs in pans which are made from different
This noise occurs in pans which are made from different
materials superimposed on one another. It is caused by the
materials superimposed on one another. It is caused by the
materials superimposed on one another. It is caused by the
vibrations that occur in the adjoining surfaces of the different
vibrations that occur in the adjoining surfaces of the different
vibrations that occur in the adjoining surfaces of the different
superimposed materials. The noise comes from the pan. The
superimposed materials. The noise comes from the pan. The
superimposed materials. The noise comes from the pan. The
amount of food and cooking method can vary noise intensity.
amount of food and cooking method can vary noise intensity.
amount of food and cooking method can vary noise intensity.

After-sales service

After-sales service
After-sales service
After-sales service
After-sales service
Our after-sales service is there for you if your appliance should
need to be repaired. We are committed fo find the best solution
also in order to avoid an unnecessary call-out.
E number and FD number:
Please quote the E number (product number) and the FD
number (production number) of your appliance when
contacting the after-sales service. The rating plate bearing
these numbers can be found on the appliance certificate.
Please note that a visit from an after-sales service engineer is
not free of charge, even during the warranty period.
Please find the contact data of all countries in the enclosed
customer service list.
Solution
Dry the control panel area or remove the object.
Unplug the hob from the mains. Wait about 30 seconds before
plugging it in again.*
Unplug the hob from the mains. Wait about 30 seconds before
plugging it in again.*
Wait until the electronic system has cooled down sufficiently. Then
press any symbol on the hob. *
Contact your power company.
Wait until the electronic system has cooled down sufficiently before
switching it back on.
A high-pitched whistling sound
A high-pitched whistling sound
A high-pitched whistling sound
This noise is produced mainly in pans made from different
This noise is produced mainly in pans made from different
This noise is produced mainly in pans made from different
materials superimposed on one another, and it occurs when
materials superimposed on one another, and it occurs when
materials superimposed on one another, and it occurs when
such pans are heated at maximum power on two hotplates at
such pans are heated at maximum power on two hotplates at
such pans are heated at maximum power on two hotplates at
the same time. The whistling disappears or becomes fainter as
the same time. The whistling disappears or becomes fainter as
the same time. The whistling disappears or becomes fainter as
soon as the power level is lowered.
soon as the power level is lowered.
soon as the power level is lowered.
Noise from the fan
Noise from the fan
Noise from the fan
For proper use of the electronic system, the temperature of the
For proper use of the electronic system, the temperature of the
For proper use of the electronic system, the temperature of the
hob must be controlled. To do this, the hob has a fan which
hob must be controlled. To do this, the hob has a fan which
hob must be controlled. To do this, the hob has a fan which
turns on when a high temperature is detected. The fan may also
turns on when a high temperature is detected. The fan may also
turns on when a high temperature is detected. The fan may also
work by inertia after the hob has been switched off, if the
work by inertia after the hob has been switched off, if the
work by inertia after the hob has been switched off, if the
temperature detected is still too high.
temperature detected is still too high.
temperature detected is still too high.
Rhythmic sounds similar to the hands of a clock
Rhythmic sounds similar to the hands of a clock
Rhythmic sounds similar to the hands of a clock
This noise is only produced when the 3 or more left hotplates
are working and disappears or is reduced when one of the
hotplates is switched off.
The noises described are normal, they are part of induction
heating technology and not a sign of malfunction.
To book an engineer visit and product advice
0844 8928999
GB
Calls from a BT landline will be charged at up to
3 pence per minute. A call set-up fee of up to 6 pence
may apply.
01450 2655
IE
Trust the expertise of the manufacturer, and rest assured that
the repair will be carried out by trained service technicians
using original spare parts for your domestic appliance.
13