Siemens EH8..ML2 series Kullanım Kılavuzu - Sayfa 12
Hob Siemens EH8..ML2 series için çevrimiçi göz atın veya pdf Kullanım Kılavuzu indirin. Siemens EH8..ML2 series 16 sayfaları.
Ayrıca Siemens EH8..ML2 series için: Kullanım Kılavuzu (20 sayfalar)
Sayfayı YazdırAutomatic time limitation
If the hotplate remains in use for a long time and no changes
are made in the settings, the automatic time limitation function
is triggered.
The hotplate stops heating. On the hotplate display,
flash alternately.
Cleaning protection
Cleaning the control panel while the range is on may change
the settings.
In order to avoid this, the range has a cleaning protection
function. Press the
symbol. An audible signal sounds. The
#
control panel is locked for 35 seconds. The surface of the
Basic settings
The device has several basic settings. These settings may be
adapted to the needs of the user.
Indicator
Function
Childproof lock
™‚
‹
Off.*
On.
‚
Beeps
™ƒ
Most signals deactivated.
‹
‚
Some beeps deactivated.
All beeps activated.*
ƒ
Automatic timer
™†
Switched off.*
‹
‚
-
ŠŠ
Automatic shut-off time
Duration of the time program function warning signal
™‡
‚
10 seconds*.
30 seconds.
ƒ
„
1 minute.
Power-Management function
™ˆ
= Deactivated.*
‹
= 1,000 W minimum power.
‚
. = 1,500 W.
‚
= 2,000 W.
ƒ
etc.
Š
or
Š
. = maximum power of the hob.
Hotplate time selection
™Š
‹
Unlimited: the last hotplate programmed remains selected.*
limited: The hotplate will only remain selected for 10 seconds.
‚
Return to default settings
™‹
Personal settings.*
‹
‚
Return to factory settings.
*Factory settings
12
The indicator goes out when any symbol is pressed. The
hotplate can now be reset.
When the automatic time function is used, it is governed by the
and
selected power level (from 1 to 10 hours).
"
‰
control panel can now be cleaned without risk of changing the
settings.
Note: The lock does not affect the main switch. The range may
be switched off when desired.