Epson BrightLink 710Ui Kurulum Kılavuzu - Sayfa 14

Projektör Epson BrightLink 710Ui için çevrimiçi göz atın veya pdf Kurulum Kılavuzu indirin. Epson BrightLink 710Ui 43 sayfaları.

Configuring Projector Settings for Multiple Projectors

Follow the instructions in these sections to set up multiple projectors for use as a DuoLink system.

Note: Turn on one of the projectors, and then perform all of the configuration tasks listed here. Turn the

projector off, then turn on the second projector and perform the configuration tasks on that projector.

Projector Identification System for Multiple Projector Control

Matching Images for Multiple Projectors

Pen Calibration

Calibrating for Finger Touch Interactivity

Enabling Multi-Projection

You must enable the Multi-Projection settings on both projectors to set them up for DuoLink.

1. In the Extended menu, set the Easy Interactive Function > Advanced > Sync of Projectors

setting to Wired.

2. Set the Wired Sync Mode setting to Mode 1.

3. Make sure the Distance of Projectors setting is set to Mode 1

4. Select the Multi-Projection setting and set it to Left or Right based on the position of the projector.

5. Press Esc and make sure the Pen Operation Mode setting is set to Windows/Mac Mode.

6. Press Esc again and make sure the USB Type B setting is set to Easy Interactive Function.