Epson BrightLink Pro 1410Wi Hızlı Referans Kılavuzu - Sayfa 2
Projektör Epson BrightLink Pro 1410Wi için çevrimiçi göz atın veya pdf Hızlı Referans Kılavuzu indirin. Epson BrightLink Pro 1410Wi 6 sayfaları. Quick reference
Ayrıca Epson BrightLink Pro 1410Wi için: Ürün Özellikleri (6 sayfalar), Uygunluk Beyanı (4 sayfalar), Ek (1 sayfalar)
Sayfayı Yazdır
1
T urning on and Calibrating the Projector
To turn on the projector, press the red or orange
power button on the remote control, control pad, or
on the projector itself.
Calibration coordinates the position of the pen with
the location of your annotations. Your projector may
already be calibrated. If not, follow the instructions
below:
1
T o calibrate automatically, press the User button
on the remote control. You see the following:
2
P ress Enter to select Yes. A pattern appears.
3
Wait until calibration is complete.
I f you see a message that calibration failed,
or the pen position and cursor location don't
match, you can calibrate manually. Press the
Menu button on the remote control, then select
Extended menu > Easy Interactive Function >
Manual Calibration and press Enter. Follow the
instructions on the screen to calibrate manually.
Using the Remote
Control
Turn projector
on/off
Capture the
projected image
Access menu
system for
additional
adjustments
Auto-calibrate
Page through
documents
Project 2
images at the
same time
For more information on using the remote control, see
the online User's Guide. You can install a link to the
User's Guide by inserting the BrightLink Pro 1410Wi CD.
Or go to epson.com/brightlinkdownloads (U.S.) or
epson.ca/brightlinkdownloads (Canada).
Print the projected image
Select from various
image sources
connected to the
projector
Save the projected
image
Select whiteboard
mode (turns on the
projector if it is off)
Switch between
annotation mode
and interactive
computer mode
Enter