Epson ChromaBlast 1.0 Başlangıç Kılavuzu - Sayfa 43
Projektör Epson ChromaBlast 1.0 için çevrimiçi göz atın veya pdf Başlangıç Kılavuzu indirin. Epson ChromaBlast 1.0 47 sayfaları. For epson stylus pro 4880
Ayrıca Epson ChromaBlast 1.0 için: Kullanıcı El Kitabı (13 sayfalar)
Sayfayı Yazdır
Sawgrass Technologies, Inc.
Troubleshooting
The troubleshooting tips found in this section relate mainly to problems
that can be seen in transferred ChromaBlast™ images. If you are having
problems related to the performance of your printer, please refer to the
Problem Solving section found in the EPSON Stylus Pro 4880 Printer
User's Guide.
The colors in my transferred image are incorrect
The image may need color adjustment. Use the ChromaBlast
4880 Driver™ v1.0 color matching software. For more information
on how to use this software, please see the section entitled
ChromaBlast 4880 Driver™ v1.0 User's Guide.
Ensure you used the right printer driver and driver settings.
Please see the section entitled ChromaBlast 4880 Driver™ v1.0
User's Guide.
Ensure you pressed the item with the proper time, temperature,
and pressure. For guidelines see the section entitled Printing and
Heat Transfer Instructions.
Verify all colors print correctly. Run the Nozzle Check utility and
clean the print heads as required.
My printout gets cut off on the bottom or side
Verify the printer driver is setup for the correct paper size. Your
printer driver setting needs to match the media size that is loaded
in your printer.
Ensure the right paper guide is in the proper position on the
printer. When setting up the printer, slide the right paper guide to
the left until it clicks into position.
ChromaBlast
Getting Started Guide for the EPSON Stylus Pro 4880
™
41