Cisco 7961G-GE - IP Phone VoIP Kullanıcı Kılavuzu - Sayfa 4

IP Telefon Cisco 7961G-GE - IP Phone VoIP için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Cisco 7961G-GE - IP Phone VoIP 6 sayfaları. Unified communications manager 9.0 (sccp and sip)
Ayrıca Cisco 7961G-GE - IP Phone VoIP için: Veri Sayfası (8 sayfalar), Kullanıcı Kılavuzu (4 sayfalar), Kullanıcı Kılavuzu (13 sayfalar), Yönetim Kılavuzu (12 sayfalar), Kullanıcı Kılavuzu (13 sayfalar), Kullanıcı Kılavuzu (13 sayfalar), Manuel (12 sayfalar), Yönetim Kılavuzu (16 sayfalar), Sorun Giderme ve Bakım (27 sayfalar)

Cisco 7961G-GE - IP Phone VoIP Kullanıcı Kılavuzu

Wideband Headset

Wideband Headset
If you use a headset that supports wideband, you may experience improved audio sensitivity if you enable
the wideband setting on your phone (this setting is disabled by default). To access the setting, choose
User Preferences > Audio Preferences > Wideband Headset.
If the Wideband Headset setting is dimmed, then you cannot control this setting.
Check with your system administrator to be sure your phone system is configured to use wideband. If the
system is not configured for wideband, you may not detect any additional audio sensitivity even when using
a wideband headset. To learn more about your headset, refer to the headset documentation or contact your
system administrator for assistance.
Speakerphone
If the handset is in its cradle and
call will trigger speakerphone mode automatically.
If you want to...
Toggle speakerphone mode on or off
Switch to a handset
Adjust the volume level for a call

AutoAnswer with Headset or Speakerphone

When AutoAnswer is enabled, your phone answers incoming calls automatically after a few rings. Your
system administrator configures AutoAnswer to use either the speakerphone or a headset. You may use
AutoAnswer if you receive a high volume of incoming calls.
When AutoAnswer is enabled, you may hear a short ring. If this is distracting, lower the ringer volume.
Handset, Headset, and Speakerphone
4
is not lit, many of the actions you can take to dial a number or answer a
Then...
Press
.
Lift the handset.
Press
tone.
Press Save to preserve the volume level for future
calls.
Handset, Headset, and Speakerphone
during a call or after invoking a dial
>