Cisco 7962G - Unified IP Phone VoIP Yönetim Kılavuzu - Sayfa 13

IP Telefon Cisco 7962G - Unified IP Phone VoIP için çevrimiçi göz atın veya pdf Yönetim Kılavuzu indirin. Cisco 7962G - Unified IP Phone VoIP 16 sayfaları. Unified communications manager 9.0 (sccp and sip)
Ayrıca Cisco 7962G - Unified IP Phone VoIP için: Kullanıcı Kılavuzu (23 sayfalar), Veri Sayfası (5 sayfalar), Kullanıcı Kılavuzu (6 sayfalar), Kullanıcı Kılavuzu (4 sayfalar), Teknik Özellikler (5 sayfalar), Yönetim Kılavuzu (12 sayfalar), Kullanıcı Kılavuzu (13 sayfalar), Kullanıcı Kılavuzu (12 sayfalar), Hızlı Referans Kılavuzu (2 sayfalar), Kullanıcı Kılavuzu (6 sayfalar), Sorun Giderme ve Bakım (27 sayfalar)

Cisco Unified IP Phones Installation

See the following figure for a graphical overview of the phone parts.

Figure 3: Parts Used to Wall Mount the Cisco Unified IP Phone

Before You Begin

To ensure that the handset attaches securely to a wall-mounted phone, remove the handset wall hook from

the handset rest, rotate the hook 180 degrees, and reinsert the hook. Turning the hook exposes a lip on which

the handset catches when the phone is vertical. For an illustrated procedure, see Installing the Wall Mount

Kit for the Cisco Unified IP Phone at:

http://www.cisco.com/en/US/products/hw/phones/ps379/prod_installation_guides_list.html

Use care not to damage wires or pipes located inside the wall when securing screws to wall studs.

Caution

Procedure

Step 1

Push in the footstand adjustment button.

Step 2

Adjust the footstand, so it is flat against the back of the phone.

Step 3

Insert two screws into a wall stud, matching them to the two screw holes on the back of the footstand.

The keyholes fit standard phone jack mounts.

Step 4

Hang the phone on the wall.

Footstand adjustment button: Raises and lowers adjustment plate

Wall mounting screw holes

Adjustment plate: Raises and lowers phone vertically

Cisco Unified IP Phone 7941G, 7941G-GE, 7942G, 7961G, 7961G-GE, and 7962G Administration Guide for Cisco Unified

Mount Phone on Wall

Communications Manager 9.0 (SCCP and SIP)