Cisco 7965 Referans Kılavuzu - Sayfa 3

IP Telefon Cisco 7965 için çevrimiçi göz atın veya pdf Referans Kılavuzu indirin. Cisco 7965 4 sayfaları. Ip phone and voice mail
Ayrıca Cisco 7965 için: Kullanıcı Kılavuzu (6 sayfalar), Kullanıcı Kılavuzu (4 sayfalar), Hızlı Referans Kılavuzu (3 sayfalar), Hızlı Referans Kılavuzu (8 sayfalar), Kullanıcı Kılavuzu (6 sayfalar), Kullanıcı Kılavuzu (2 sayfalar), Kullanıcı Eğitim Kılavuzu (2 sayfalar), Hızlı Referans Kılavuzu (2 sayfalar), Kullanıcı Kılavuzu (6 sayfalar), Hızlı Referans Kılavuzu (4 sayfalar), Hızlı Başlangıç Kılavuzu (30 sayfalar), Kullanıcı Eğitim Kılavuzu (42 sayfalar), Hızlı Referans Kılavuzu (3 sayfalar), Kullanıcı Kılavuzu (2 sayfalar), Hızlı Referans Kılavuzu (2 sayfalar), Hızlı Referans Kılavuzu (2 sayfalar), Hızlı Başlangıç Kılavuzu (2 sayfalar), Hızlı Başlangıç Kılavuzu (3 sayfalar), Başlarken (2 sayfalar)

Sayfayı Yazdır

Reference Guide for All Cisco 7900 Series Phones

How To...

Directions...

Transfer

1. While connected, press Transfer soft key. Call is automatically placed on hold. A new line is automatically

2. Dial the number to which you want to transfer.

3. While second line is ringing, you may perform either:

To cancel a transfer:

1. Use the Navigation Pad to highlight the original call.

2. Press the Resume soft key to reconnect to the original call.

Transfer to Unity

To Transfer a call directly to Unity Voice Mail:

Voice Mail

1. While connected, press Transfer soft key.

2. Dial * and the 10-digit number where the call should be transferred.

3. Press Transfer soft key.

Conference Call

1. While connected, press Confrn soft key. Call is automatically placed on hold. A new line is automatically

2. Dial number of second party. Wait for second call to connect, and announce conference.

3. Press Confrn to add party to the conference call.

4. To remove last party, press End Call soft key.

Repeat steps to conference up to four parties, including you. ConfList lists all conference parties.

Abbreviated/

All Abbreviated/Speed Dial configuration MUST be done via the Self Care Portal.

Speed Dial

To use a Speed Dial code, :

1. With the handset down, enter the Abbreviated/Speed Dial code.

2. Press the AbbrDial soft key.

3. Lift handset.

Call Forward

To activate:

1. Press CFwdALL soft key, and enter desired number.

2. To cancel, press CFwdALL soft key.

To forward All Calls to Voice Mail (optional):

1. Press CFwdALL soft key.

2. Press Messages button. Display status: "Forwarded to Voicemail"

3. To cancel forwarding to Voice Mail, press CFwdALL soft key.

Pick Up

To answer call in Your PickUp group:

1. Lift handset.

2. Press PickUp soft key to be connected to the incoming call:

www.its.ny.gov/telecommunications

activated, and a dial tone is heard.

a. Supervised Transfer (preferred): Wait on line to announce the call. Then press Transfer to connect

the two callers.

b. Unsupervised Transfer: Press Transfer to connect the call and complete the transfer.

activated, and a dial tone is heard.

a. To answer call, press Answer soft key.

b. To divert to your voicemail, press Divert soft key.

c. To send call back to original called number, let call ring.

Cisco

7900