Cisco 7970 Series Kurulum - Sayfa 2

IP Telefon Cisco 7970 Series için çevrimiçi göz atın veya pdf Kurulum indirin. Cisco 7970 Series 15 sayfaları. Unified ip phone
Ayrıca Cisco 7970 Series için: Hızlı Referans (2 sayfalar), Telefon Kılavuzu (45 sayfalar)

Sayfayı Yazdır

Before You Begin

Network Requirements

Cisco CallManager Configuration

Cisco IP Phone 7970 Administration Guide for Cisco CallManager 3.3

3-2

Speakerphone, page 3-3

•

Headset, page 3-4

External Speakers and Microphone, page 3-4

•

Safety and Performance, page 3-6

•

For the Cisco IP Phone 7970 to successfully operate as a Cisco IP Phone endpoint

in your network, your network must meet the following requirements:

Working Voice over IP (VoIP) Network

•

VoIP configured on your Cisco routers and gateways

–

Cisco CallManager Release 3.3(3) or higher installed in your network

–

and configured to handle call processing

IP network that supports DHCP or manual assignment of IP address, gateway,

•

and subnet mask

The Cisco IP Phone determines the date and time from Cisco CallManager.

The Cisco IP Phone requires Cisco CallManager to handle call processing. Refer

to Cisco CallManager Administration Guide or context-sensitive help in the

Cisco CallManager application to ensure that Cisco CallManager is set up

properly to manage the phone and to properly route and process calls.

If you plan to use auto-registration, verify that it is enabled and properly

configured in Cisco CallManager before connecting any Cisco IP Phone to the

network. For information about enabling and configuring auto-registration, refer

to Cisco CallManager Administration Guide. Also, see the

Cisco CallManager Database" section on page

You must use Cisco CallManager to configure and assign telephony features to the

Cisco IP Phones. See the

on page 5-2

for details.

Chapter 3

2-5.

"Telephony Features Available for the Phone" section

Setting Up the Cisco IP Phone

"Adding Phones to the

OL-4314-01