Epson EasyMP EMP-1715 Hızlı Bağlantı Kılavuzu - Sayfa 9

Projektör Epson EasyMP EMP-1715 için çevrimiçi göz atın veya pdf Hızlı Bağlantı Kılavuzu indirin. Epson EasyMP EMP-1715 44 sayfaları. Esc/vp21 command user's guide for business projectors
Ayrıca Epson EasyMP EMP-1715 için: Teknik Özellikler (1 sayfalar), Kullanıcı Kılavuzu (25 sayfalar), Kullanıcı Kılavuzu (25 sayfalar), Teknik Özellikler (4 sayfalar), Hızlı Başlangıç Kılavuzu (16 sayfalar), Kullanıcı Kılavuzu (28 sayfalar), Kullanıcı Kılavuzu (28 sayfalar)

Select the projector you want to connect to.

Click the "Connect" button.

If the keyword entry screen is displayed, enter

the projector keyword (four digits) that is

projected on the EasyMP screen, and click

"OK".

The computer and the projector are connected via the network.

The EMP NS Connection tool bar is displayed on the computer

screen. You can use this tool bar to operate the projector, make

settings, and disconnect from the network.

Stop/Show/Pause

(When connected to the projector)

Project a PowerPoint slide show

only (Presentation Mode)

When the target projector is not found

Check that the projector's power supply is on

and that the EasyMP screen is displayed. It is

also possible that the electromagnetic waves of

the wireless LAN are too weak to reach. Check

that the projector is not too far away.

When the following message is displayed when you click the "Enter" button

"The selected projector is busy. Do you want to continue the connection process?" Because

interrupt is prohibited you cannot connect while the selected projector is connected to another

computer.

Screen during connection

Projector control

Multi-screen display Preview

When there are too many projectors displayed

You can narrow the search by performing the

following operation.

1 Click "Manual search".

2 Enter the ESSID for the target projector and

click the "Enter" button.

(Procedure 5)

Set options

Movie Sending Mode

(Procedure 6)