Cisco 7975G - Unified IP Phone VoIP Kullanıcı Kılavuzu - Sayfa 14

IP Telefon Cisco 7975G - Unified IP Phone VoIP için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Cisco 7975G - Unified IP Phone VoIP 42 sayfaları. Unified ip phone
Ayrıca Cisco 7975G - Unified IP Phone VoIP için: Veri Sayfası (5 sayfalar), Kullanıcı Kılavuzu (21 sayfalar), Kuruluma Hazırlanıyor (17 sayfalar), Özelleştirme (11 sayfalar), Kurulum Kılavuzu (19 sayfalar), Hızlı Kılavuz (15 sayfalar), Kurulum Kılavuzu (12 sayfalar), Sorun Giderme ve Bakım (25 sayfalar), Yönetici Kılavuzu (6 sayfalar)

Transfer Call Without Talking to Transfer Recipient

Procedure

Step 1

From an active call, press Transfer.

Step 2

Enter the target number.

Step 3

Press Transfer again to complete the transfer or EndCall to cancel.

You need to wait until you hear ringing before you complete the transfer.

Step 4

If your phone has on-hook transfer enabled, complete the transfer by hanging up.

Talk to Transfer Recipient Before Transferring Call (Consult Transfer)

Procedure

Step 1

From an active call, press Transfer.

Step 2

Enter the target number.

Step 3

Wait for the transfer recipient to answer.

Step 4

Press Transfer again to complete the transfer or EndCall to cancel.

Step 5

If your phone has on-hook transfer enabled, complete the transfer by hanging up.

Call Transfer to Voice Message System

You can use iDivert to send an active, ringing, or on-hold call to your voice message system. Depending on

the type of call and your phone configuration, you can also use iDivert to send the call to the voice message

system of another party.

• If the call was originally sent to the phone of another person, iDivert allows you to redirect the call

• If the call is sent to you directly (not transferred or forwarded to you), or if your phone does not support

Tips

• If your phone displays a menu that disappears before you make your selection, you can press iDivert

Cisco Unified IP Phone 7975G, 7971G-GE, 7970G, 7965G, and 7945G User Guide for Cisco Unified Communications

Manager 9.0 (SCCP and SIP)

either to your own voice message system or to the voice message system of the original called party.

Your system administrator makes this option available to you.

the option described above, using iDivert redirects the call to your voice message system.

again to redisplay the menu. You can also contact your system administrator to configure a longer timeout

value.

Calling Features