Connecting to a Projector on a Network and Projecting
B
Manual search
In Quick Connection Mode, you can search for the projector
based on the SSID selected from a list.
In Advanced Connection Mode, you can search for a projector
based on a specified IP address or projector name.
C
Status
The following six icons indicate the status of the detected projectors.
Standby
Busy
Busy (Disable
interrupt
connection)
Currently in
use by
another
application
Searching
Not found.
D
Projector name
The projector's name is displayed.
E
Update list (Quick Connection Mode only)
Updates Status and Signal intensity.
Available.
Available. When you click Connect,
the computer currently connected is
disconnected and your computer is
connected.
Cannot be selected. Disable
interrupt connection is set on
another computer which is already
connected.
The projector's Configuration menu is
open. You can select it after closing
the Configuration menu and running
the search again.
Displayed while running Manual
search or Profile.
Displayed when a projector cannot be
found as a result of Manual search or
Profile. In Quick Connection Mode,
you can only select multiple
projectors with the same SSID.
F
Disable interrupt connection
Select this to prevent an interrupt connection by other computers
while connected to the selected projector.
G
Use multi-display
Select this when using the Multi-screen display function. When this is
selected, Display layout and Display properties are displayed at the
bottom of the screen.
s "Using Multi-Screen Display"
H
Troubleshooting
If there is a problem and you cannot have a connection, press this
button to open the EasyMP Network Projection Troubleshooting
screen.
I
Connect
Connect to the projector you selected from the search results list.
When a connection is made with a projector, a toolbar is displayed.
J
Set options
You can make option settings such as the processing method when
EasyMP Network Projection starts.
s "Set options"
p.34
K
Save in the profile
Saves the results of a network projector search as a profile.
s "Making a Profile"
p.18
L
Clear list
Deletes all search results.
M
SSID (Quick Connection Mode only)
The projector's SSID is displayed.
N
Signal intensity (Quick Connection Mode only)
As the Signal intensity increases, so does the number of lit indicators.
p.24
13
Sayfayı Yazdır