Cisco 860 Series Manuel - Sayfa 14

IP Telefon Cisco 860 Series için çevrimiçi göz atın veya pdf Manuel indirin. Cisco 860 Series 36 sayfaları.
Ayrıca Cisco 860 Series için: Hızlı Referans Kılavuzu (3 sayfalar), Hızlı Referans Kılavuzu (3 sayfalar)

Cisco 860 Series Manuel
Hardware and Buttons
Figure 3: Webex Wireless Phone 840 and 840S
Table 4: Webex Wireless Phone 840 and 840S Hardware and Buttons
Group Number
1
2
3
4
5
Your Phone
14
Hardware or Buttons in Group
On the top left of the phone is the round Power button, which turns the power on and off,
and locks and unlocks the screen.
On the top center of the 840S phone is the barcode scanner, and on the top right is a round
red Programmable Emergency alarm button.
• Barcode scanner—If the phone is an 840S, scans a barcode.
• Programmable Emergency button—By default this programmable button is set as
an Emergency button. If configured, the button sends a preprogrammed emergency
panic alert.
On the top front of the phone is the receive speaker in the middle, and the front camera
on the right.
• Receive speaker—Receives audio.
• Front camera—Captures images.
On the right side of the phone is the Programmable PTT button. By default this
programmable button is set to activate PTT. If enabled, PTT sends broadcast messages
over preprogrammed channels like a walkie-talkie.
On the bottom front of the phone is the microphone, which captures your audio to send.
Your Phone