Epson EasyMP.net Network Option Board Kurulum Kılavuzu - Sayfa 40

Projektör Epson EasyMP.net Network Option Board için çevrimiçi göz atın veya pdf Kurulum Kılavuzu indirin. Epson EasyMP.net Network Option Board 42 sayfaları. Easymp.net network option

Sayfayı Yazdır

Hints on How to

Integrated Projector Management

Turning Multiple Projectors On or Off

EMP Monitor allows you to turn the power on or off for multiple projectors through

the network. You can also monitor the projectors by listing their status.

"Integrated Management for Projector Status Check and Control (EMP

Monitor)" in the EasyMP.net Operation Guide

Reporting an Error by Mail Notification

The Mail Notification function automatically sends an e-mail to the preset address

and reports an abnormal status when it occurs. A projector problem can be detected

from a remote location.

•

Setting the Mail Notification Function

The mail destinations and events to be reported can be set in any of the following

software.

• EasyConfiguration

• EasyWeb

Up to three mail destinations can be set and an e-mail message can

be sent to these destinations simultaneously.

If the projector has failed to start up suddenly due to a fatal error

occurring in the projector, the mail may not be sent.

If you have selected the "Advanced1" and set the "Standby Mode" to

"Network ON" in the configuration menu of the projector, you can

monitor the projector even when it is in the standby status (when the

indicator is lit orange).

Select "Network" and "Mail Notification

function".

"Establishing the Mail

Notification Function" of "Network

Setup(LAN Setup)" in the EasyMP.net

Operation Guide

Select "EasyConfiguration", "Network" and

"Mail Notification function".

Setup from the PC (EasyWeb)" in the

EasyMP.net Operation Guide

"Projector