Cisco 8831 Kurulum Kılavuzu - Sayfa 14

IP Telefon Cisco 8831 için çevrimiçi göz atın veya pdf Kurulum Kılavuzu indirin. Cisco 8831 14 sayfaları. Hard factory reset
Ayrıca Cisco 8831 için: Özellikler (17 sayfalar), Dağıtım Kılavuzu (6 sayfalar), Hızlı Referans Kılavuzu (2 sayfalar), Kullanıcı Kılavuzu (6 sayfalar), Hızlı Referans Kılavuzu (6 sayfalar), Kullanıcı Kılavuzu (15 sayfalar), Hızlı Referans Kılavuzu (2 sayfalar), Hızlı Başlangıç Kılavuzu (13 sayfalar), Sorun Giderme Kılavuzu (3 sayfalar)

Cisco Unified IP Phone Security

The security features protect against several threats, including threats to the identity of the conference phone

and to data. These features establish and maintain secure communication streams between the conference

phone and the Cisco Unified Communications Manager server, and digitally sign files before they are delivered.

For more information about the security features, see

Features

Set Up Locally Significant Certificate

You can initiate the installation of a Locally Significant Certificate (LSC) from the Security Configuration

menu on the conference phone. This menu also lets you update or remove an LSC.

To manually configure an LSC on the conference phone, perform these steps:

Before You Begin

Ensure that the appropriate Cisco Unified Communications Manager and the Certificate Authority Proxy

Function (CAPF) security configurations are complete:

• The CTL file should have a CAPF certificate.

• On Cisco Unified Communications Operating System Administration, verify that the CAPF certificate

• The CAPF is running and configured.

For more information, see Cisco Unified Communications Manager Security Guide.

Procedure

Step 1

Obtain the CAPF authentication code that was set when the CAPF was configured.

Step 2

From the phone, choose Apps > Admin Settings > Security Configuration.

Note

Step 3

Scroll to LSC and press Update.

The conference phone prompts for an authentication string.

Step 4

Enter the authentication code and press Submit.

The conference phone begins to install, update, or remove the LSC, depending on how the CAPF was

configured. During the procedure, a notification message is displayed so that you can monitor progress.

The LSC install, update, or removal process can take a long time to complete. You can stop the process at

any time by pressing Exit.

You can verify that an LSC is installed on the conference phone by choosing Apps > Admin Settings >

Security Setup and ensuring that the LSC setting shows Installed.

Cisco Unified IP Conference Phone 8831 Administration Guide for Cisco Unified Communications Manager

9.0

and also consult the Cisco Unified Communications Manager Security Guide.

has been installed.

You can control access to the Administrator Settings Menu by using the Settings Access field in the

Cisco Unified Communications Manager Administration Device Configuration window. For more

information, see the Cisco Unified Communications Manager Administration Guide.

Cisco Unified IP Conference Phone 8831 Installation

Cisco Unified IP Conference Phone 8831 Security