Cisco 8851 Manuel - Sayfa 11

Your Phone

Step 2

Press Applications

Step 3

Navigate to Admin settings > Network setup > Wi-Fi client setup > Wi-Fi sign in access.

Step 4

Navigate to Wireless and press On.

Step 5

Navigate to Wi-Fi sign in access and press On.

Step 6

Press Apply to save the changes, or press Revert to cancel the changes.

Connect to a Preconfigured Wi-Fi Network

You can connect to a Wi-Fi network with your Cisco IP Phone 8861 and 8865. But the Cisco IP Phone 8865NR

does not support Wi-Fi.

Depending upon how your phone is configured, you could be required to sign in when you join a Wi-Fi

network or when your phone powers up.

You cannot dismiss the Wi-Fi sign-in window without entering the correct username and password.

Procedure

Step 1

Enter your Wi-Fi credentials when prompted.

Step 2

Select Sign-in.

Connect to a VPN

You connect to your VPN in one of two ways:

• By entering credentials (username and password, or just a password)

• With a certificate

If you have a certificate installed on your phone, you do not need to do anything. Your phone automatically

connects to the VPN.

Procedure

Step 1

When prompted, enter your VPN credentials.

Step 2

Select Sign-in.

Set up a Phone for Use with VPN

Before you begin

To complete this procedure, you must have a valid TFTP server address. If you do not have this information,

contact your administrator.

You cannot use the Wi-Fi client with the Cisco IP Phone 8865NR.

Connect to a Preconfigured Wi-Fi Network

Your Phone