Cisco 8851 Manuel - Sayfa 5

Cisco IP Phone Accessories

Cisco Headset 521 and 522

The Cisco Headsets 521 and 522 are two wired headsets that have been developed for use on Cisco IP Phones

and devices. The Cisco Headset 521 features a single earpiece for extended wear and comfort. The Cisco

Headset 522 features two earpieces for use in a noisy workplace.

Both headsets feature a 3.5-mm connector for use on laptops and mobile devices. An inline controller with a

USB connector is also available for use on the Cisco IP Phone 8851, 8861, and 8865 with Multiplaform

Firmware. The controller is an easy way to answer your calls, and to access basic phone features such as hold

and resume, mute, and volume control.

The Cisco Headsets 521 and 522 require Multiplatform Firmware Release 11.2(3) or later version. Upgrade

your phones to the latest firmware before using these headsets.

To check your phone model and the firmware version, press Applications and select Status > Product

information. The Product name field shows your phone model. The Software version field shows the

installed load where you can get the firmware version.

Cisco Headset 521 and 522 Buttons and LED

Your controller buttons are used for basic call features.

Figure 1: Cisco Headset 521 and 522 Controller

The following table describes the Cisco Headset 521 and 522 controller buttons.

Table 2: Cisco Headset 521 and 522 Controller Buttons

Number

Name

Description

Toggle the microphone on and off.

Mute button

Adjust the volume on your headset.

Volume button (

and

)

Cisco Headset 521 and 522

Cisco IP Phone Accessories