Epson EB-470 Kurulum Kılavuzu - Sayfa 4

Projektör Epson EB-470 için çevrimiçi göz atın veya pdf Kurulum Kılavuzu indirin. Epson EB-470 37 sayfaları. Ultra-short-throw projectors
Ayrıca Epson EB-470 için: Teknik Özellikler (6 sayfalar), Veri Sayfası (2 sayfalar)

Sayfayı Yazdır
Epson EB-470 Kurulum Kılavuzu

Place to Install the Setting Plate

Carry out the power supply wiring work for the installation location of the setting plate in advance.
Install the projector away from other electric devices such as fluorescent lights or air conditioners. Some
kinds of fluorescent lights could interfere with the remote control of the projector.
It is recommended to keep connection cable length less than 20 meters to reduce external noise.
We recommend using stick-on screens or board screens.
When using the Easy Interactive Function, make sure the projector is setup under the following
conditions.
• The projection screen is a rectangular shape without any distortion.
• The projector is tilted at an angle of no more than ± 3
• When using Keystone, the amount of V-Keystone and H-Keystone correction is no more than ±6.

About This Installation Guide

This guide describes how to mount the short-throw projector EB-485Wi/485W/480i/480/475Wi/475W/470 to
a wall using the exclusive setting plate.
°
vertically and horizontally in relation to the projected screen.
4