Digital Matter Dart Başlangıç Kılavuzu - Sayfa 4

GPS Digital Matter Dart için çevrimiçi göz atın veya pdf Başlangıç Kılavuzu indirin. Digital Matter Dart 6 sayfaları.

Getting Online

Once the battery is connected, the internal LED will come on and flash red and the device will do the following:

If the SIM card works and there is sufficient charge in the battery, the device will connect to the OEM Server. Go to

www.oemserver.com/installer

connected recently.

The LED will flash slowly at first. When it opens a connection to the server, it will flash fast. Once data is sent, it will go

solid briefly, and revert to flashing fast. When the device goes to sleep, the LED will switch off.

If the battery is too low, use the harness to provide external power.

If the LED flashes but the Dart does not connect, check the SIM is in the holder correctly and check that the SIM is

working.

The housing closes with clips and does not need screws.

To close the housing, line up the top and bottom parts. Push the housing together firmly.

To open the housing, insert a flat screw driver into the opening highlighted below. Carefully lever the two halves

apart.

(http://www.oemserver.com/installer)

Getting Started Guide –

and search for the serial number. Confirm that it has

Dart + Dart2

4/6